Fleetrun
Hecterra
NimBus
Other apps
Wialon for Android/iOS
Logistics
Wialon Local
Wialon Hosting
WiaTag
Configurator
LeaseControl
en
Contents
Stops
  • stops
  • tables

A stop is an interval during which the speed was lower than the value from the Min. moving speed field, but the duration of which was less than the value from the Min. parking time field on the Trip detector tab. When a stop is detected, a trip is not interrupted. Stops can be registered at traffic lights, crossroads, in traffic jams, etc.

If there are several messages with zero or insignificant speed in succession, they are combined into one stop. If the total time of such a stop reaches Minimum parking time, it is registered as a parking interval (not as a stop).

The information which can be displayed in this kind of report is described below.

ColumnDescription
Beginning

The time when the stop started, that is, the time of the first message with the speed lower than the value from  the Min. moving speed field.

EndThe time when the stop ended, that is, the time of the last message with the speed lower than the value from  the Min. moving speed field.
DurationThe time between the beginning and the end of the stop.
Total time

The time from the beginning to the end of stop. It is recommended to use this column in combination with the grouping parameter or the Total row. If the Total row is configured in the table, it shows all the time that elapsed from the start of the first stop to the end of the last one.

Off-timeThe time from the end of the previous stop to the beginning of the current one (to be defined beginning from the second stop).
LocationThe address where the unit stopped.
CoordinatesThe coordinates of the unit at the moment of a stop (in decimal degrees).
DriverThe name of the driver (if available).
TrailerThe name of the trailer (if it was assigned).
CountThe number of stops.
CounterThe counter sensor values (can be helpful either in grouping table data by years/months/weeks/days/shifts or for the reports on unit groups).
NotesAn empty column for your custom comments.
Avg weightThe average weight value registered for the stop interval.
Min weightThe minimum weight value registered for the stop interval.
Max weightThe maximum weight value registered for the stop interval.
Initial weightThe weight value at the beginning of the stop interval.
Final weightThe weight value at the end of the stop interval.
Video

Files saved during the stop interval using the Video module. To watch them, click on the icon (the number of grouped files is indicated to the right of it, if several). If several grouped files are available, you can select the required one in the drop-down list in the upper-left corner.

The column is available if the Video monitoring service is activated in the account properties.

ImageThe images received from the unit. Viewing images in reports and the functions available while doing this are described here.

See data in reports to learn how time (duration) can be formatted.

Interval filtration (by stop duration, sensor state, driver, trailer, fuel fillings and drains) can be applied to this table.

This kind of report can be supplemented with the corresponding markers on the map.

Stops should be distinguished from parkings.

Questions and answers

  Do reports display the data on the manual assignment of the driver after the data storage period expires?

Yes, but only if the driver has not had other assignments since they were last assigned to the unit.


If you find a mistake in the text, please select it and press Ctrl+Enter.
Thank you for your feedback!
Report a mistake
Text with the mistake Comment
Maximum 500 characters