Detailed unit information
The prerequisites for accessing the unit information are listed on the Monitoring page.
To access the detailed information about a unit:
- Open the Monitoring tab in the navigation bar.
- Tap the required unit section in the work list.
- Select the Info tab.
Info tab overview
The Info tab displays:
- Unit location on the map: The unit location based on the last message.
- Latest data: Real-time information as described on the Unit sections with latest data page.
- Detailed unit information: Detailed unit data, such as, sensor values, profile properties, device type, unique ID, organized into sections.
From the Info tab, you can also access the unit menu by tapping the icon 
.
Sections in detailed unit information
Detailed unit information is based on the unit properties and can only be edited in the web version. After a long tap on the line with the property, its value is copied to the clipboard.
This information can include the following sections:
| Tab | Description |
|---|---|
| Custom fields | The custom fields added on the same-name tab in the web version of Wialon. |
| Sensors | The sensors for which the Visible option is enabled on the Sensors tab in the web version of Wialon. The order of sensors depends on their order configured on the tab. If filtration is configured for a fuel level sensor, the unit information shows its filtered value. The unit section, by contrast, displays the raw value. |
| Profile | The unit characteristics specified on the Profile tab in the web version of Wialon. |
| Hardware | The device type and unique ID specified on the General tab in the web version of Wialon. To see this information, you must have the View connectivity settings access right to the unit. |
| Counters | The readings of the mileage, engine hours, and GPRS traffic counters. |
| Parameters | The raw data received from the device. To view parameters in the mobile application, the Messages service is required. |
| Trailers | The trailers assigned to the unit. |
| Drivers | The drivers assigned to the unit. To the right of the driver’s name you can see the phone number specified in the driver’s properties. To call the driver, tap the number. |
| Altitude | The altitude above sea level. |
| Satellites | The number of satellites with which the connection is established. |