Trips
The Trips report shows the intervals of movement with the indication of time, location, and other parameters such as speed, mileage, fuel, and many others. The intervals of movement (trips) are detected according to the parameters set on the Trip detector tab and adjusted for each unit individually.
The table can include the columns described below.
| Column | Description |
|---|---|
| Beginning | The date and time when the trip began. |
| Initial location | The address where the device was at the beginning of the trip. |
| End | The date and time when the trip ended. |
| Final location | The address where the unit was at the end of the trip. |
| Duration | The time interval of the trip. |
| Engine hours | The time of the operation of engine hours during the trip. |
| Mileage | The distance travelled by the unit during the whole trip. |
| Avg speed | The average speed within the trip. |
| Max speed | The maximum speed registered within the interval. |
| Trips count | The number of trips at the interval (can be useful if you have enabled grouping by years/months/weeks/days/shifts or if you run the report for a unit group). |
| Notes | An empty column for your custom comments. |
See data in reports to find more about formatting time, mileage, etc.
Also, the interval filtering by geofences/units can be applied to this table.